Strike F1 to Continue F2 for Setup Utility
On startup, I get the message following diskette drive 0 seek failure 1 not found drive Serial ATA, SATA 2 strike F-1 key to continue, F2 to run the utility series
At the start of the black screen appears and tells Diskeyye drive 0 seek failure 1 drive not found: Serial ATA, SATA2 strike F1 key to continue, F2 to run the Setup utility, how can I keep this lift every time?
Hi FRANKDURHAM,
1. are you able to boot into Windows after the error message?
2. did you of recent changes on the computer?
3 when was the last time it was working fine?
Usually, this would happen if the hard drive is not set correctly in the basic input/output system (BIOS) or the settings in the basic input/output system (BIOS) are incorrect.
Basic input/output system (BIOS) is a program built into personal computers that starts the operating system when you turn on your computer. It is also referred to as system firmware. Basic input/output system (BIOS) is part of the hardware of your computer and is separate from Windows.
Microsoft cannot provide specific instructions for changing your CMOS and BIOS settings because they are specific to your computer. For more information about the correct CMOS and BIOS settings for your computer and how to check and change these settings, see your computer documentation or contact the manufacturer of your computer.
Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Error 1402 could not open key HKEY_Local_Machine\software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.
Error 1402 could not open key HKEY_Local_Machine\Software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.
We have solved this problem by granting explicit permission at the same time "domain users" and "domain administrators" you can plug in "domain" in the field and the search for the users and select them. But this solved the problem for us.
Strike F1 key to continue, F2 to run the Setup utility
Floppy drive seek failure
1 driver not found: Serial ATA, SATA 1
Pilot 2 not found: Serial ATA, SATA 2
Driver 3 not found: Serial ATA, SATA 3
Has tried to get some HP programs start from the start, my Dell Dimension 8400 computer. Unchecked HP 4 functions at startup. Rebooted and got a black screen with the message:
The window could not start because the following file is missing or damaged:
Please reinstall a copy of the above file
I was forced to perform a clean installation, system recovery and return to Windows XP Home Edition, but I do go by press F1 to continue.
System always starts first of all, to a black screen with the «disketter Floppy seek failure...» ", I have Windows.
The product key from a portable computer that is running Windows XP does work on any other version of Windows XP? (OEM or retail, etc.)
original title: Windows XP Pro product keys
Different versions of Windows X is made?
That is to say) the product key from your laptop will work with "ANY" XP CD (OEM or other)
I know that with Win 7 there no difference
My wife has an XP laptop that needs a reconstruction (it is sloooow) and the original recovery CD corrupted - will be a work of standard CD - with its original product key?
I don't want to go there and try - for fear that once the installation started - the hard drive will be formatted and it won't come back!
Very!
Each version of XP had its own drive and discs were also different between OEM and retail channels.
Some manufacturers also BIOS-locked their discs so that they could not even start running on computers other than their own.
priority for the program continues to change running
Why would a program a priority continue to change while it is running?
I set the priority of the program in the 'normal' Task Manager, but it will change to 'low '. I have observed this failover so that the Task Manager is open and running the program.
Hello Mindsclay,
Thanks for posting your question in the Microsoft Community. We are happy to help you.
To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:
- This problem persists with all programs?
- Are what program you referring?
- Significant changes were made to your computer before this problem?
- To save you the priority after changing?
You can have a quick glance at the picture below to change the priority of a program in the Task Manager.
Please respond to this answer we will be happy to help you.
Thank you.
I bought hp dv6-6121tx laptop computer. The function keys f1, f2 etc; are designed to run only along
The function keys f1, f2 are designed to work only with the fn key. But, normally, we use the function keys f1, f2 etc. more often than the adjustment of brightness, volume control etc.; / I would like to change the key option based. Is this possible. In other words, I should be able use the function keys f1, f2 etc. without pressing the fn key?
Help, please
concerning
RAVIKUMAR
Hello
Check in your bios menu to see if you have the option described in the link below.
http://support.HP.com/us-en/document/c02035108
Kind regards
DP - K
We continue message "stop running this Script" and our computer is slow
We are on facebook a lot and are now on the secure http, but it is slow and we still get a newsletter of windows that said Stop running this script? a script on this page slows down your web browser to run slowly
Hello
1 have you made changes to your computer recently?
2. are you Internet Explorer to access the Internet?
3. If so, what is the version of the operating system installed on your computer?
I suggest you follow the steps, if you use
Internet Explorer to access the Internet.
I hope this helps.
Strike F1 key to continue after replacing power supply and pulling the battery system on Poweredge R410
Hi all
Recently, I replaced a non redundant power supply on my Dell Poweredge R410. During troubleshooting, I also temporarily removed the battery from the system at any given time.
The server is back up and running, but when booting, I get:
"The 4 fan speed can change in installation configuration feature and the option card systems
Press F1 to continue, F2 to run the configuration utility.
I think that some BIOS setting reset to remove the battery? I also see a lot of forum posts mentioning the cause of this error is the integrated SATA is connected to anything.
My hard drives are connected to a PERC via the PCI slot, and the machine has an optical drive. I don't see the existence of the optical drive in omreport.
Here are a few outlets omreport about SATA settings.
Integrated SATA controller: ATA
SATA port 0: Auto
SATA port 1: Off
SATA port 2: stop
SATA port 3: Off
SATA port 4: Off
Any advice on how to go about this debugging more?
Thank you!
Dave
Yes, it is possible that the optical drive is defective. Check the logs of equipment. Also enter the system BIOS setup using the F2 key and search for devices listed as unknown.
Received calls from someone claiming my operating system with ITS Technical Support fails if I hit some keys or entry "run" in the context of progragaveoft - Windows
Received phone calls twice more than one person to Support STI claiming my OS completely in case of failure very soon if I didn't follow their instructions (on behalf of Microsoft) is going to hit some keys (Windows & R simultaneously) or the entry "run" under PROGRAMS & follow instructions - added my computer sent signals for malicious info - calling gave 1-800-601-1921 as their company ph #-called; answering machine - also said their site is www.itsppcsupport.com!
Is this a scam of support? Thank you for answer-
Hello
Yes, it's a SCAM!
Avoid scams to phone for tech support
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx
In the United States, you can contact the local police to the FBI, Attorney general, and
consumer watch groups. Arm yourself with knowledge.
The Internet Crime Complaint Center (IC3) is a partnership between the
Federal Bureau of Investigation (FBI) and the National White Collar Crime Center
(NW3C), funded in part by the Bureau of Justice Assistance (BJA).
http://www.ic3.gov/complaint/default.aspx
No, Microsoft wouldn't you not solicited. Nor would they know if any errors
It exists on your computer. So those are the frauds or scams to get your money or
worse to steal your identity.
Avoid scams that use the Microsoft name fraudulently: Microsoft has no
for you unsolicited telephone calls help fix your computer
http://www.Microsoft.com/protect/fraud/phishing/msName.aspx
Scams and hoaxes
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3
Microsoft Support Center consumer
https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1
Microsoft technical support
http://support.Microsoft.com/contactus/?ws=support#TAB0
Microsoft - contact technical support
http://Windows.Microsoft.com/en-us/Windows/help/contact-support
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""> <- mark="" twain="" said="" it="">
Non-system disk press any key to continue
About 3 or 4 times a week, my screen is black and says "press any key to nonsystem disk continues." When I press a key, the same sentence is repeated. And he repeats as many times as I press a key.
I don't know why it does this or what it means or how to fix it. Ideas? thoughts? suggestions?
Go to your Bios/Setup, or the Boot Menu at startup and make sure that the boot order is for the HD player to be 1st in the boot order.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
You can have Boot USB active 1st in the boot order.
See you soon.
Mick Murphy - Microsoft partner
n005tx Pavilion 15: "selected image is not authenticated to. "Press on enter continue" at the start of the
Hi all, I have a pavilion laptop g6 - 2253ca who works with a windows 8 (64-bit). I have a strange problem since this morning and an error msg "selected image is not authenticated to. "press on enter continue ' that appears when I try to start. I have not installed program on my computer before it happens. I just sailed on the Internet and all of a sudden the screen is grey and the msg appeared on this subject.
I went on several forums for information on this subject. That's what I did:
-hard reset
-Restart and boot into BIOS
-Disable secureboot and enable legacy initialization
-Press F10 to save and exit BIOS
-Restart
-the system asked me to enter a digit of 4 password and press ENTER to apply the changes
-done, but I got stuck another MSG: "no boot device, insert the boot disk and press any key.
Not able to find something else to move to another service I thought that maybe the value default bootable device was not the HARD disk if:
-I restart and boot into the boot F9 Manager
-does not not the same msg (no boot device, insert the startup disk and press a key) is displayed.
Try to run the auto repair using the F11 Recovery Manager, but I can't start on it during startup.
So, what should I do now? I am really disappointed...
Hello
Try loading at F2 run check disk test hard if that passes you will need a recovery disk. If the hard drive is not detected reinsert the disc hard try to rerun the test if you have the same hard disk problem that went wrong to replace the drive. Please call HP technical support check for warranty and the part replaced.
Need to press the F1 key to start windows
Whenever my computer is started or restarted also it takes a long time to get up and running, then I get the message:
Primary drive 0 not found
* (30 second break)
Strike F1 key to continue, F2 to run the Setup utility
Im running Windows XP, 3gig Pent 4, 800, 2.5 GB RAM bus speed. Any new 500gig hard drive SATA, from 500gig external HARD drive. I had to do a clean install of the operating system, after the system crashed after that automatic updates are released a few weeks before.
Hello
Press f2 go to settings
Look for the boot sequence tab
Make sure the folder c: / starts first
Please click on the check mark as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers THANKS AND GOOD LUCK
Computer laptop Toshiba has lost the use of F6/F7 screen luminosity keys
HI - my daughter went on a charity site and since then, AVG Free reports the virus "win32/DH. FF840283' as being resident on the computer and the screen keys F6 and F7 light has stopped working. Further within the AVG review reveals that it is in with the utility hot key Toshiba. AVG continues to report warnings of virus being resident in this utility and screen brightness keys continue to not work. I tried restoring the system (in safe mode) which fixed the problem temporarily, but the virus came back. I tried to reinstall the hot key utilities and put the rogue named file in AVG admitted of exceptions. Again, F6 and F7 worked for a while and then stopped with the warning of viruses yet to come. Any ideas?
Hello
I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
How to: run CHKDSK - I have corrupted files
How to do a chkdsk utility. I'm not very good on computors.
Firstly - how are your backups of the stuff that you cherish on this computer? All files, photos, music, documents, Internet favorites/bookmarks, downloaded programs (installable files) and their product key (serial number) to prove that they are yours, etc. and so on? You want to make sure that these things are in place course * off * this machine before continuing. Why run the risk if you can still access them now... Save THEM to an EXTERNAL SUPPORT. Copy it to a CD/DVD or a USB hard drive. Drag and drop - all you have to do.
Then, for CHKDSK...
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265
Pictorial:
http://forums.whatthetech.com/index.php?showtopic=102348
Source: https://www.eehelp.com/question/key-failure-strike-f1-to-continue-f2-to-run/
0 Response to "Strike F1 to Continue F2 for Setup Utility"
Postar um comentário